Vertical Hammer Crusher
Vertical hammer crusher is composed of motor, shaft, hammer, machine body, turnplate, hydraulic system, control box, etc.
bettybertwww@gmail.com
Product introduction
Vertical hammer crusher is mainly used in the fields of scrap metal recycling, to clean out the different materials on metal surface and separate different metals out for further processing.
Hammers will crush materials into the crushing chamber between hob plate and wear resistant lining plate. Through the hob grinding, metal surface will be clean and different materials are separated out. Then materials get into discharge hopper through the clearance of hob plate and machine body, and discharged finally. The final metal particle is easy to transport, reduce transportation and storage cost.
Product advantages
First
High strength welding casing;
Second
Vertical opposite casing, easy to maintain;
Third
High tenacity wear resistant steel casting hammer, hob and lining plate, easy change and long service life;
Fourth
High usage coefficient bearing, reduce bearing failure caused by improper operation;
Fifth
The output size can adjust;
Sixth
Independent electrical control box, PLC control.
Technical parameter
| Model | HNVC1200 | HNVC1500 | HNVC2000 | HNVC2500 |
|---|---|---|---|---|
| Motor Power | 75-200 Kw | 75-200 Kw | 75-200 Kw | 75-200 Kw |
| Hydraulic Station Power | 1.5 Kw | 2.25 Kw | 2.25 Kw | 2.25 Kw |
| Rotation Speed | 500-900 RPM | 500-900 RPM | 500-900 RPM | 500-900 RPM |
| Hammer | 2-36 PCS | 2-36 PCS | 2-36 PCS | 2-36 PCS |
| Moving Blade | 2-36 PCS | 2-36 PCS | 2-36 PCS | 2-36 PCS |
| Dimension L/W/H | 3000*3200*3500 mm | 3300*3500*4000 mm | 4300*3800*4500 mm | 5000*4100*5000 mm/td> |
